Module 2, Engines

The engines module consists of 7 learning units. The final one, Electronic Engine Management, is currently under development.

  1. Principles of Operation
  2. Disassembly and Assembly Procedures
  3. Lubrication Systems
  4. Cooling Systems
  5. Cold Starting Systems
  6. Diesel Fuel Systems
  7. Electronic Engine Management (This learning unit is a partially developed proposal and as of April 2014, there is no sign of any progress in the development of the unit. There is no time-scale in place for the unit to become part of the course).

Please note, if you want to contact the main Training Centre in Baldoyle, you need to ring 01-8167400.

If you want to contact the CP Fitters' Section, you can Contact Us by email,, or by telephone: 00 353 1 8167543 This number gets you through to the CP Fitters' Section, Baldoyle Satellite Unit.

Our Address is : Construction Plant Fitters' Section, Unit 116, Grange Way, Baldoyle Industrial Estate, Baldoyle, Dublin D13 CA48.
We operate in a satellite unit which is about 300 metres away from the main training centre. You can see the location of this unit here, in Google Maps. You can also Check here for directions to the Baldoyle Training Centre.

Find Us on Find us on YoutubeFollow cpfitters on Twitter

Is Féidir Linn! You can view all the menus on this site as Gaeilge by going to the homepage, top right hand corner, and dropping down the language selection menu. By default it reads English (en), so just select Gaeilge (ge) instead.