:

During induction in Phase 2, you will be issued, free of charge, a pair of safety glasses.

Safety glassesThe purpose of the glasses is to protect your eyes during training. These glasses would normally be worn during activities such as battery testing, drilling or grinding.

These glasses are an item of Personal Protective Equipment (PPE), and you get one free issue of this equipment. If you mislay or loose these glasses, you must replace them at your own expense.

In the event that acitivity in the workshops requires additional eye protection (full-face mask, welding goggles etc., they will be supplied to you).

It is entirely your own responsibility to present yourself each day for training, fully equipped and dressed. Failure to do this can result in you being sent away to procure the necessary equipment.

» Course Glossary


Please note, if you want to contact the main Training Centre in Baldoyle, you need to ring 01-8167400.


If you want to contact the CP Fitters' Section, you can Contact Us by email, admin@cpfitters.info, or by telephone: 00 353 1 8167543 This number gets you through to the CP Fitters' Section, Baldoyle Satellite Unit.

Our Address is : Construction Plant Fitters' Section, Unit 116, Grange Way, Baldoyle Industrial Estate, Baldoyle, Dublin D13 CA48.
We operate in a satellite unit which is about 300 metres away from the main training centre. You can see the location of this unit here, in Google Maps. You can also Check here for directions to the Baldoyle Training Centre.

Find Us on Find us on YoutubeFollow cpfitters on Twitter

Is Féidir Linn! You can view all the menus on this site as Gaeilge by going to the homepage, top right hand corner, and dropping down the language selection menu. By default it reads English (en), so just select Gaeilge (ge) instead.